klipsch promedia 2.1 no sound right channel

On the front panel, near the bottom of the speaker, are the main volume control and a separate subwoofer-level control in between the two is a small, but nevertheless too-bright, power indicator. The right-hand satellite also hosts an integrated pre-amp module, which connects to the subwoofer using a separate-though also permanently attached-cable. WB-1 Wall Bracket Accessory for wall mounting.) Each satellite’s 10-foot cable is permanently attached in the rear.

(You can remove this stand and replace it with the $22 Each satellite rests on a metal, non-adjustable stand that angles the speaker slightly upward toward the listener’s ears. On the front of each speaker, behind a removable, mesh-and-plastic grille, you’ll find a 3-inch midrange driver and a 0.75-inch tweeter, the latter of which uses Klipsch’s (More on these latter two features in a moment.) Also on the back of the subwoofer is the system’s only power switch-like far too many otherĬomputer speakers we’ve tested, the ProMedia 2.1 requires you to crawl under your desk if you want to turn off the system to save energy.Įach of the ProMedia 2.1’s satellite speakers is approximately 8.5 inches tall, 4.2 inches wide, and 5.7 inches deep-fairly large for computer-speaker satellites. On the back of the subwoofer are standard spring-clip speaker terminals for connecting the satellites, a permanently attached power cable, a connection for the system’s pre-amp (control) module, and a Sync button for establishing a wireless connection.

Klipsch promedia 2.1 no sound right channel